Catalogues, technical documentation and instructions

For a quote, it is best to send the basic information: which product you need, its purpose, approximate dimensions, volume or capacity, the installation location, the manner of use and any special requirements for connections, color or equipment. After that, the Plastopex team can prepare a proposed solution and a custom quote.

The service life depends on the type of product, its purpose, the conditions of use, proper installation and maintenance. HDPE and PP products are designed for long-term use, and for many applications a long operational life is stated with proper installation and use.

Yes. Plastopex manufactures plastic HDPE pools using spiral-winding technology, in standard diameters and custom shapes. The pools can be used for bathing, hydrotherapy, technical applications, fish farming, decorative water surfaces and other specific purposes.

Many Plastopex products made of HDPE material, such as pontoons, boats and floating structures, are suitable for use in fresh and salt water. The exact recommendation depends on the product, the conditions of use, the load and the requirements of the project.

Yes. Plastopex manufactures HDPE plastic pontoons, floating marinas, floating docks, piers, platforms and plastic boats. These solutions are used for rafts, docks, marinas, catamarans, fish ponds, floating platforms and other structures on water.

Grease and oil separators are used for the treatment of wastewater that contains fats, oils, petroleum derivatives and light liquids. Grease separators are often used in restaurants, kitchens, canteens, dairies and food processing plants, while oil separators are used at fuel stations, parking lots, garages, car services and industrial areas.

Plastic septic tanks are used for the collection and disposal of sanitary-fecal and wastewater at locations that are not connected to the sewage network. They are suitable for households, holiday homes, schools, kindergartens, hotels, motels, commercial buildings and other places where a safe solution for wastewater is needed.

Plastic cisterns are most often horizontal tanks for storing water, fuel, chemicals, food liquids and other media. Plastic tanks are most often vertical and are used for similar purposes, but are chosen when a different configuration, installation space or connection method is needed. The exact choice depends on the purpose, volume, location and technical requirements.

HDPE is high-density polyethylene, a durable plastic material used for products that require strength, water-tightness, chemical resistance and a long service life. Because of its characteristics, it is often used for cisterns, tanks, septic tanks, pontoons, pools, boats, pipes and other custom products.

Plastopex products are most often made of HDPE, PEHD, PP and PPH materials. These materials are known for their resistance to corrosion, moisture, chemical effects, wear and external conditions, which makes them suitable for water, wastewater, industry, agriculture and structures on water.

Yes. Most Plastopex products can be made to measure, in accordance with the required volume, diameter, length, shape, connections, equipment and installation conditions. For a precise quote, it is necessary to send the basic information about the purpose, dimensions, capacity and location of the project.

Plastopex manufactures plastic cisterns, tanks, vats, pools, silos, septic tanks, grease and oil separators, plastic manholes, pipes, ventilation pipes, pontoons, floating marinas and plastic boats. The products are made of HDPE, PEHD, PP and PPH materials, according to the purpose, dimensions and requirements of the project.

Depending on the type and extent of the damage, certain HDPE pontoons and plastic boats can be serviced or repaired on site. Before any repair, it is necessary to assess the damage and check whether the product is safe for further use.

No. HDPE, PEHD, PP and PPH materials do not corrode like metal products, so they do not require anti-corrosion protection. This is one of the important advantages of plastic cisterns, tanks, septic tanks, separators, pontoons, boats and other Plastopex products.

Plastic pipes should be inspected according to the type of system: sewage, drainage, industrial wastewater, irrigation or ventilation. For ventilation pipes, it is important to check flow-through, joints, fans, butterfly valves and roof elements if they are installed.

Plastic manholes serve for access, inspection, cleaning and maintenance of a sewage or water-meter system. Periodically it is necessary to check the interior of the manhole, the connections, the channel (kineta), the step rungs and the cover, especially for systems that are exposed to greater load or intensive use.

Grease and oil separators should be inspected and cleaned regularly, with removal of sediment, grease, oil or separated substances in accordance with the system load. The maintenance frequency depends on the type of facility, the quantity of wastewater, the degree of pollution and the applicable regulations for waste disposal.

Plastic septic tanks require regular emptying and inspection in accordance with the intensity of use, the number of users and the type of system. It is necessary to provide access for maintenance and to follow the recommendations for installation, emptying and safe handling of wastewater.

Plastic HDPE silos have smooth inner walls that make emptying and cleaning easier. Nevertheless, regular inspection of the openings, connections and the filling and emptying systems is recommended, especially when storing grains, animal feed, flour, granulates, cement or powdery materials.

Plastic vats should be cleaned before and after use, especially if they are used for fruit, pomace, wine, cabbage or other fermentation processes. If the vat has a lid, a water seal, a tap or handles, it is necessary to check that all elements are clean, functional and properly positioned.

Plastic cisterns and tanks should be inspected periodically, cleaned as needed, and their connections, openings, valves and joints checked. The maintenance frequency depends on whether they are used for drinking water, technical water, chemicals, fuel, food liquids or other media.

Yes. Plastopex products made of HDPE, PEHD, PP and PPH materials have smooth inner surfaces that make cleaning and maintenance easier. For proper maintenance it is important to use the appropriate procedures according to the product's purpose and the type of medium that is stored or transported.

It is possible that permits, approvals or design documentation are required for septic tanks, separators, wastewater drainage, floating structures, marinas or pontoons. This depends on the location, intended use and applicable local regulations. Before carrying out the project, it is recommended to check with the competent institutions or a qualified professional.

For products where correct installation is important for functionality, Plastopex can provide basic guidelines, technical information or a recommendation according to the product type. For more complex systems, regulations, structural analysis, permits and specific site conditions, a design engineer or a competent qualified professional needs to be involved.

When installing a floating marina, it is important to plan the number of berths, the type of vessels, the dimensions of the structure, the water depth, waves, wind, changes in water level, anchoring, moorings, fenders, access ramps and safe access for users. For such projects, professional planning and calculation are recommended.

Plastic pontoons are assembled according to the planned structure, the required load capacity, the pontoon layout and the conditions on the water. They can be connected with a metal, aluminum or wooden structure. For safe use, it is important to correctly calculate the total load, the number of pontoons and the method of connection.

Plastic vats should be placed on a flat, stable and prepared surface. This is especially important for larger volumes, because the contents in the vat create a significant load. If the vat has a tap, lid, water seal or handles, it is necessary to check that they are correctly fitted before use.

Yes. Plastic manholes can be made with connections for joining to PEHD, PVC or other suitable pipes, in accordance with the design and the type of sewer system. Proper sealing of the joints is important for the functionality and watertightness of the system.

Separators are installed in a prepared trench, on a compacted bed of sand or gravel, with proper leveling and lateral backfilling. For installation beneath traffic surfaces, a reinforced-concrete relief slab may be required, and in areas with groundwater, attention should be paid to the buoyancy force.

Yes. Plastic tanks and cisterns can be installed above ground when such a design is provided for by the project. In that case it is important to ensure a stable, flat and prepared base or appropriate supports, depending on the type of tank, the volume and the medium being stored.

Yes, certain plastic cisterns can be buried if they are designed for such a purpose and if they are installed according to the project conditions. When burying, it is important to properly prepare the excavation, the bed, lateral backfilling, protection from groundwater and any external loads.

The ground for installing a septic tank is prepared by an excavation that is larger than the dimensions of the tank, leveling the bottom, laying a sand base and careful backfilling. If groundwater is present, anchoring may be required. If there is a larger layer of soil above or a traffic load, a relief concrete slab may be required.

For larger products, buried systems, septic tanks, separators, cisterns, tanks, manholes, pipes, pontoons and floating marinas, installation according to the design and professional instructions is recommended. Proper ground preparation, leveling, securing and connection are important for safe and long-lasting use.

For the fastest quote preparation, send: the product name, intended use, approximate dimensions, required volume or capacity, location, installation conditions, type of liquid or material, required number of units, and additional requirements such as connections, color, lids, equipment or special design.

Plastopex combines custom manufacturing, experience working with HDPE and PP materials, a wide product range and the ability to adapt to a specific project. Customers choose Plastopex when they need a durable, practical and functional plastic solution for water, industry, wastewater, agriculture or floating structures.

Plastiša is the digital advisor of the Plastopex brand. It helps users find a suitable product, understand the basic possibilities and prepare a clear inquiry for the Plastopex team. Plastiša can help with pools, tanks, cisterns, silos, septic tanks, separators, pontoons, boats and other custom plastic solutions.

Yes. A quote request can be sent via the contact form on the website or via the digital assistant on the website. In the request it is useful to state the product, intended use, required volume or dimensions, location, installation conditions and additional requirements for equipment or connections.

Plastopex has standard dimensions for certain products, such as pools, tanks, cisterns, manholes, pipes, pontoons and separators, but many products can be adapted to the customer's requirements. The exact possibilities depend on the product and technical conditions.

Yes. The Plastopex team can help you choose a suitable product based on the intended use, dimensions, capacity, the medium being stored or transported, the installation location and special requirements. To get started, it is enough to send basic information about the project.

Yes. Plastopex products can be intended for households, agricultural farms, companies, industrial systems, hospitality facilities, public institutions, tourist complexes and other users who need custom plastic solutions.

Plastopex can undertake projects and deliveries by arrangement, depending on the product, quantity, location and logistical conditions. For accurate delivery information, it is best to send an inquiry with the location and the type of product you need.

You can contact Plastopex by phone, WhatsApp, email or the contact form on the website. Phone and WhatsApp: +381 69 723 200. Email: info@plastopex.com.

Plastopex is located in Osečina, Serbia. The contact address is Pere Jovanovića Komirićanca 50, 14530 Osečina, Serbia.

Plastopex was founded in 2010. Since then it has developed and manufactured custom plastic products, with a focus on durability, functionality and adaptation to customers' requirements.

Plastopex is a manufacturer of custom plastic products made of HDPE, PEHD, PP and PPH materials. The company manufactures solutions for storing water and liquids, wastewater, agriculture, industry, ventilation and floating structures.