Grease and oil separators

Name

Grease and oil separators

Category

Wastewater

Model

Data in preparation

GTIN / EAN

Data in preparation

Dimensions

Standard dimensions from Ø1000 × 1200 mm to Ø2400 × 11100 mm, depending on the separator type, flow rate and volume

Volume / capacity

Volumes from 1 m³ to 50 m³; flow rates from 2 l/s to 250 l/s

Manufacturer

Društvo za proizvodnju trgovinu i usluge Plastopex DOO OSEČINA

Address

Pere Jovanovića - Komirićanca 50, 14253 Osečina, Republic of Serbia

Country of manufacture

Srbija

Registration no.

21431893

Tax ID

111142066

Contact

info@plastopex.com+381 69 723 200

General guidance

General guidance for the material: the thermoplastic (HDPE/PP) does not degrade in soil and is fully recyclable. At end of life, empty and clean the product, remove metal parts and fittings, and hand it to a licensed plastic waste operator. Plastopex advises on dismantling and take-back.

Data in preparation

Carbon footprint

Data in preparation

Packaging material

Data in preparation

Recyclable

Data in preparation

Reusable

Data in preparation

Data in preparation

Material

PEHD / HDPE

Production technology

Spiral winding

Product type

Plastic separator for grease, oil and petroleum products

Available flow rates

2 l/s | 5 l/s | 10 l/s | 15 l/s | 20 l/s | 30 l/s | 50 l/s | 80 l/s | 100 l/s | 150 l/s | 200 l/s | 250 l/s

Volume

From 1 m³ to 50 m³, depending on the separator type and flow rate

Dimensions

From Ø1000 × 1200 mm to Ø2400 × 11100 mm, according to model and capacity

Connecting pipes

Ø125 | Ø160 | Ø200 | Ø250 | Ø300 | Ø400 | Ø500 | Ø600 mm

Standard models

SEP-2 | SEP-5 | SEP-10 | SEP-15 | SEP-20 | SEP-30 | SEP-50 | SEP-80 | SEP-100 | SEP-150 | SEP-200 | SEP-250

Designs

Grease separators, oil separators, petroleum product separators and separators with a bypass

Equipment

Settling tank, replaceable coalescing filter insert, inlet and outlet connections, inspection openings and additional equipment as per the project

Possible design standard

EN858 for oil and petroleum product separators, according to the type of device and project requirements

Installation

Buried in a prepared trench, on a compacted bed of sand or gravel, with proper lateral backfilling

Traffic load

For installation beneath traffic surfaces, an appropriate reinforced-concrete relief slab is required as per the project

Groundwater

In groundwater zones, attention must be paid to the buoyancy force and appropriate securing measures must be provided

Maintenance

Periodic removal of sediment and separated grease or oil, in line with the system load and applicable regulations

Manufacturing

Made to order, according to flow rate, volume, wastewater type, installation location and technical requirements