Digital Product Passport
Septic tanks
Product, materials, care, end-of-life and compliance data, following the EU Ecodesign for Sustainable Products Regulation (ESPR 2024/1781) and the Packaging and Packaging Waste Regulation (PPWR 2025/40).
- Identifier
- PLX-SEPTICKE-JAME
- Version
- 1.0
- Updated
- 09/11/2026
- EU DPP registry
- Registration in preparation
Scan for the passport on the product
plastopex.com/dpp/PLX-SEPTICKE-JAME
Product
- Name
- Septic tanks
- Category
- Wastewater
- Model
- Data in preparation
- GTIN / EAN
- Data in preparation
- Dimensions
- Standard diameters from Ø800 to Ø2000 mm, while the length depends on the volume, number of chambers and septic-tank design
- Volume / capacity
- From 500 l to 15,000 l, depending on the number of users, purpose and installation conditions
Manufacturer
- Manufacturer
- Društvo za proizvodnju trgovinu i usluge Plastopex DOO OSEČINA
- Address
- Pere Jovanovića - Komirićanca 50, 14253 Osečina, Republic of Serbia
- Country of manufacture
- Srbija
- Registration no.
- 21431893
- Tax ID
- 111142066
- Contact
- info@plastopex.com+381 69 723 200
Materials and composition
| Material | Material code | Share | Recycled content | Recyclability |
|---|---|---|---|---|
| HDPE (high-density polyethylene) | 2 PE-HD | Data in preparation | Data in preparation | Recyclable |
From the product's technical data; shares in preparation.
Service life and care
Service life
Data in preparation
Use and care
Data in preparation
Repair and spare parts
Data in preparation
End of life and recycling
General guidance
General guidance for the material: the thermoplastic (HDPE/PP) does not degrade in soil and is fully recyclable. At end of life, empty and clean the product, remove metal parts and fittings, and hand it to a licensed plastic waste operator. Plastopex advises on dismantling and take-back.
Substances of concern
Data in preparation
Carbon footprint
Data in preparation
Packaging (PPWR)
- Packaging material
- Data in preparation
- Recyclable
- Data in preparation
- Reusable
- Data in preparation
Regulations and standards
- In preparation
ESPR (EU) 2024/1781 - Ecodesign for Sustainable Products
- In preparation
PPWR (EU) 2025/40 - Packaging and Packaging Waste
Documents
Data in preparation
Technical data
- Material
- PEHD / HDPE
- Production technology
- Spiral winding
- Product type
- Plastic septic tank for sanitary sewage and wastewater
- Volume
- 500 l | 1000 l | 1500 l | 2000 l | 3000 l | 4000 l | 5000 l | 6000 l | 7000 l | 8000 l | 10000 l | 12000 l | 15000 l
- Diameters
- Ø800 | Ø1000 | Ø1200 | Ø1300 | Ø1600 | Ø2000 mm
- Length
- From approximately 1000 mm to 7500 mm, depending on volume, diameter and design
- Designs
- Non-flow, flow-through, two-chamber, three-chamber and designs with partial biological treatment
- Purpose
- Collection and disposal of sanitary sewage and wastewater
- Installation
- Buried in a prepared excavation, with a leveled bottom, sandy base and proper backfilling
- Anchoring
- Recommended in groundwater zones or according to project conditions
- Relief slab
- Required when there is a greater overburden, traffic load or a project requirement
- Connections and inspection openings
- Custom-made, in line with the method of inflow, outflow, maintenance and emptying
- Installation (placement)
- On a stable and properly prepared base, according to the installation instructions and site conditions
- Manufacturing
- Made to order, according to volume, system type, number of chambers and project technical requirements
The passport is completed as data is verified. Items marked "In preparation" are not declared yet. For compliance questions, contact Plastopex.
Have a project in mind?
Send us your dimensions and use case - our team will prepare a tailored quote, no obligation.